Sincerity, Innovation, Harmony and Dedication
Your location:
Homepage
-
-
-
The company launches training for driving operators

The company launches training for driving operators

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2017-10-18
  • Views:0

(Summary description)In order to further enhance the company's special operations capabilities and the safety awareness of special operations personnel, in accordance with the 2017 training plan, the company conducted safety training for driving operators in the production conference room on the first floor of the office building on October 18, 2017.

The company launches training for driving operators

(Summary description)In order to further enhance the company's special operations capabilities and the safety awareness of special operations personnel, in accordance with the 2017 training plan, the company conducted safety training for driving operators in the production conference room on the first floor of the office building on October 18, 2017.

  • Categories:Company news
  • Author:
  • Origin:
  • Time of issue:2017-10-18
  • Views:0
Information

In order to further enhance the company's special operations capabilities and the safety awareness of special operations personnel, in accordance with the 2017 training plan, the company conducted safety training for driving operators in the production conference room on the first floor of the office building on October 18, 2017.

This training is jointly promoted by the relevant leaders of the Equipment Guarantee Department and EHS. Through training, the driving operators can standardize the operation and be proficient in operation skills. At the same time, correct and effective emergency measures can be taken for various emergencies, thereby reducing the occurrence of safety accidents. The main content of the training mainly includes: "Lifting Machinery Safety Management Measures" documents, "Ten No Lifting" when driving, regulations on the use of spreaders, and precautions during operation.

 

news

 

During the training, the following contents were emphasized and explained in detail:

(1) It is strictly forbidden to overload and use unqualified or damaged wire ropes;

(2) Select qualified slings according to the standard requirements;

(3) Do a good job of hoisting protection at the corners (especially the new mold);

(4) Operating rules for safe driving:

①The operator must pass training and examination and hold an operation certificate before he can operate independently; those who have not been specially trained, tested and obtained a certificate are not allowed to operate; ②Before driving, carefully check whether the mechanical, electrical parts and protective safety devices of the equipment are in good condition. reliable. If the main accessories such as the controller brake, limiter, electric bell, emergency switch, etc. fail, lifting is strictly prohibited; ③The hook lifter must obey the instructions of the hook lifter, but the emergency stop signal initiated by anyone should be stopped immediately; ④The operator must The operation can only be carried out after receiving the command signal, and the bell should be sounded when the vehicle starts; ⑤When approaching the winch stopper, large and small vehicles approaching the terminal or encountering adjacent vehicles, the speed should be slow. It is not allowed to use anti-vehicle instead of braking, limit parking instead of parking, emergency switch instead of ordinary switch; ⑥When work is stopped, no lifting objects are allowed to stay in the air. During operation, a bell should be sounded to warn when someone on the ground or dropping hanging parts. It is strictly forbidden to hang objects over people's heads. Lifting objects must not be too high from the ground; ⑦When two cranes are lifting an object at the same time, they must follow the instructions and keep pace; ⑧When running, keep a certain distance between the driving and the driving, and collisions are strictly prohibited; ⑨The driving car must be parked for maintenance. In a safe place, after cutting off the power supply, hang up a warning sign of "No Switching On". Fences should be set up on the ground, and a sign of “No Passage” should be hung; ⑩When lifting heavy tonnage objects, they should be lifted slightly off the ground to make sure that the hanging is stable and the brakes are good, then lift up and run slowly. It is not allowed to operate three control handles at the same time; ⑪It is strictly forbidden for people to go up and down when driving, nor to overhaul and adjust the parts during operation; ⑫If a sudden power failure occurs during movement, the switch handle must be placed in the "0" position. If the lifting parts are not put down or the rigging is not disconnected, they are not allowed to leave; ⑬When the lifting parts fall due to a sudden failure during operation, emergency measures must be taken to land to no one; ⑭Sufficient lighting should be provided for night operations; ⑮Be careful when driving There are no obstacles on the track; when the lifting is tall and the object obstructs the line of sight, special personnel should be set up on both sides to monitor and command; ⑯ the operator must earnestly achieve "ten no hanging": people standing on the hanging objects or floating objects do not hang ; Do not hoist when overloaded; when the light is dim, the signal is not clear, the weight is unknown, do not hoist; do not hoist when the heavy objects are hung on the crane directly for processing; the workpiece is not hoisted when buried in the ground; the oblique workpiece is not hoisted; the angular objects are not hoisted without protective measures ;Oxygen cylinders, acetylene generators and other explosive objects shall not be hung; safety devices shall not be hung; illegally commanded shall not be hung; ⑰After the work is completed, the driving vehicle must stop at the specified position, raise the hook, drive the trolley to both ends of the track, and Place the control handle at the "0" position and cut off the power supply; ⑱ Do a driving tight check once a month.

In addition, this batch of driving training, there are wonderful case analysis and explanation; and after the end of the course, the training assessment link to evaluate the effect of this training. The assessment is mainly embodied in the form of a written test, with a full score of 100 on the test paper and a pass with 80 points. After the company’s training is qualified, the company’s internal "Certificate of Driving Operation and Induction" will be issued.

Through this training, the safety awareness of driving operators has been improved, and a better training objective has been achieved.

 

human resource department

October 18, 2017

Scan the QR code to read on your phone

More News

Marketing Department: 29C, No.899, Feizhou International Building, Lingling Road, Xuhui District, Shanghai.
Tel:
86-021-54198392    Fax:86-021-54245612
HQ address:Zhaomin Green Industrial Area, Lvsigang Town, Qidong City, Jiangsu Province.
Tel:
86-0513-83272222    Fax:86-0513-83273600
E_mail:
dawntine@dawn-tine.com
Web:http://www.dawn-tine.com

Website

Website

Wechat

Wechat

Copyright © 2016 Nantong Dawntine Electrical Materials Co.,Ltd.  All rights reserved.   苏ICP备13056695号